Pools and hot tubs in Prince George's County, MD
Pools need a building permit. A pool at a house must be 8 ft from the rear line and 5 ft from side lines, and enclosed by a fence at least 6 ft high.
A person last checked these rules on October 20, 2026. This is guidance only, so confirm with Prince George's County before you build.
The details
- A railing with a locking gate on an above-grade pool can serve as the fence.High confidence
Check a project at your address
SetbackIQ reads the zoning, flood zone, historic district, and environmental maps for your lot. Then it applies these rules.
Common questions
- How far from the lot line can a pool go, and what permits does it need in Prince George's County?
- Pools need a building permit. A pool at a house must be 8 ft from the rear line and 5 ft from side lines, and enclosed by a fence at least 6 ft high.
Sources
- Prince George's County Zoning Ordinance (Subtitle 27), Sections 27-5202, 27-5203, 27-6600 and 27-6800. Checked 2026-10-21
[27-5203(b)(15)] An outdoor swimming pool shall be enclosed by a fence at least six feet high... An outdoor swimming pool accessory to a single-family dwelling may be located in a required side or rear yard except that it shall be set back at least eight fe…
Disclaimer: This is general information, not legal or professional advice for any one property. Codes change. SetbackIQ is not a zoning determination, a permit, or a survey, and it does not replace an architect, engineer, or lawyer. Confirm with your building and zoning offices before you build, buy, or sign a contract.